Wallet FAQ

We Recommend to install the full node wallet https://pirate.black/wallets/treasure-chest/

Pirate fornece várias opções de carteiras para diferentes necessidades. A carteira Treasure Chest assegura seus fundos por gerenciar a blockchain Pirate no seu computuador.

A carteira lite utiliza uma blockchain que não é armazenada no seu computador e é ideal para computadores com baixas especificações.

Em primeiro lugar, você deve sempre realizar o backup da sua private key. Para encontrá-la, vá para seus endereços de recebimento, clique com botão direito do mouse nos seus endereços-z (cada endereço z tem sua própria private key) e clique em exportar private key.

This will bring up a screen where you can copy it and save it. It is highly recommended that you Encrypt the wallet and save it on a USB drive that you never plug in unless you need to retrieve your private key.

Praticamente um pequeno ou nenhum compromisso em anonimato. Existe uma pequena quantia de metadados vazadas para o servidor insight. O servidor insight saberá o endereço de IP associado com as transações da carteira, baseada na solicitação de witnesses da carteira.

Contudo, utilizar uma VPN pode proteger o usuário contra esse vazamento.

Você pode baixar o arquivo bootstrap para carteiras Pirate Chain aqui:

https://eu.bootstrap.dexstats.info/ARRR-bootstrap.tar.gz

Leia esse post do blog para instruções detalhadas de como instalar o arquivo bootstrap:

https://pirate.black/bootstrap-zcash-parameters-installation-guide/

Leia esse post do blog para instruções detalhadas de como instalar os arquivos de parâmetros zcash:

https://pirate.black/bootstrap-zcash-parameters-installation-guide/

Embora essa seja a melhor prática em outras moedas, devido aos recursos de anonimato da ARRR, você não precisa fazer isso. 

Mas é claro que exceções se aplicam, especialmente no caso de você precisar usar um endereço para enviar fundos para uma exchange ou postou isso em algum lugar online. Nesses casos, nós recomendamos gerar um novo endereço.

Por favor note que, tendo muitos endereços em uma carteira holdando ARRR, você estará impactando negativamente a performance daquela carteira.

Is possible to sync faster by using the Bootstrap

(GUI)

• Click on Settings option
• Click on the Wallet tab
• Use the Reindex and Rescan with bootstrap option.
• Click on OK
• Reinicie a carteira

(CLI) start the daemon with ./pirated -bootstrap=2

Note: The bootstrap is only supported on full node wallet

Sim, se você prefere rodar sua carteira com linhas de comando, as instruções atualizadas podem ser encontradas aqui: Run Pirate using CLI

Assista ao vídeo tutorial aqui: https://pirate.black/how-to-videos/

Você faz isso enviando uma DM para "@ARRR TipBot" no Discord.

Então digite o comando !arrrtip withdraw seuendereçotreasurechest quantia

Se não tiver certeza, você também pode usar !arrrtip help para uma lista completa de comandos.

A taxa de transação padrão para a carteira Treasure Chest é 0.0001 ARRR.

Exchanges têm sua própria estrutura de taxas, que é algo que o time da Pirate Chain não tem controle.

A spending key is also known as the private key. 

The spending key (private key) contains all your wallet addresses, transactions and funds.

Solution: Restore the wallet with the Seedphrase.

Windows : You need to Restore the wallet with the Seedphrase - go to %appdata%\pirate - rename arrr-light-wallet.dat to arrr-light-wallet-old.dat - open the lite wallet - select Restore wallet > insert your seephrase

Linux: - go to ~/.pirate - rename arrr-light-wallet.dat to arrr-light-wallet-old.dat - open the lite wallet - select Restore wallet > insert your seephrase

Mac: - close the wallet - go to ~/Library/Application\ Support/pirate/ - rename arrr-light-wallet.dat file to arrr-light-wallet-old.dat - launch the wallet and restore your wallet with seedphrase

Click on File > Export Seedphrase

Click on 3 lines on Left corner > Show Passphrase

Go To RECEIVE tab then Click on EXPORT PRIVATE KEY

Go to FILE tab > Right click on  IMPORT SPENDING KEY and paste your SECRET-EXTENDED-KEY

Click on Edit > Encrypt Wallet

Go to Edit tab > Right click on ZSADDRESS and select EXPORT EXTENDED KEY

- Click on Settings option - Click on the Wallet tab - Use the Reindex and Rescan with bootstrap option. - Click on OK - Restart the wallet

Delete all folders and files except wallet.dat from:

Mac: ~/Library/Application\ Support/Komodo/PIRATE/

Windows: %appdata%\Komodo\PIRATE\

Linux: ~/.komodo/PIRATE/

Windows: go to %appdata%\pirate and back up the arrr-light-wallet.dat file

Linux: - go to ~/.pirate and back up the arrr-light-wallet.dat file

Mac: - go to ~/Library/Application\ Support/pirate/ and back up the arrr-light-wallet.dat file

Solution: - (GUI) Close The “Treasure Chest wallet” / (CLI) stop the “Pirated” Daemon - Delete “Blocks” “Chainstate” and “Database” Folder From (PIRATE)

Where it is located in Mac: ~/Library/Application\ Support/komodo/PIRATE/

Windows: %appdata%\komodo\PIRATE\

Linux: ~/.komodo/PIRATE - (GUI) Launch The “Treasure Chest wallet” / “Pirated” Daemon

Lite wallet:
Click On Edit > Rescan

Mobile Wallet: Click On Left Corner > Rescan > Insert the password and click on Rescan

Full Node:
(GUI) TreasureChest: Click On File > rescan

(CLI) stop the “Pirated” Daemon By typing ./pirate-cli stop, Then start the daemon with command `./pirated -rescan` Or add rescan=1 on pirate.conf file then start the pirate daemon

Solution: - Update the wallet to latest version https://pirate.black/wallets/desktop-lite/

Rename the “arrr-light-wallet.dat” file to “arrr-light-wallet-old.dat” folder From (PIRATE) where is located in,

Mac: ~/Library/Application\ Support/ PIRATE/

Windows: %appdata%\PIRATE\

Linux:~/.pirate - Launch the Lite wallet - Restore the wallet with the seed phrase

Solution: Go To Receive tab and click on Next address (e.g. click on Next address twice if 2 addresses are missing) Then go to Edit > rescan

Solution: Update the wallet to the latest version: https://pirate.black/wallets/treasure-chest/

(GUI) Treasure Chest: click File > Show seed phrase

(CLI) ./pirate-cli z_exportseedphrase

Solution:

- Remember the address/es that has the funds

- Download and extract Paperwallet and Full node wallets For Windows Open (CMD) where the piratepaperwallet.exe file is located and Type the following Command piratepaperwallet.exe --partialphrase "word1 word2 word3 .... word23" -z 1 >> result.txt

For Linux and Mac(Terminal):

Open where the piratepaperwallet file is located and type the following Command: ./piratepaperwallet --partialphrase "word1 word2 word3 .... word23" -z 1 >> result.txt

NOTE:
Replace "word1 word2 word3 .... word23" to your seed phrase words

Open the result.txt file - Search and find your address, copy the private key of the address -

Import the Private key on the Full node wallet

Carteira Lite: go to this path and delete everything on PIRATE folder

Mac ~/Library/Application\ Support/PIRATE/

Windows %appdata%\PIRATE\

Linux ~/.PIRATE/

Full node wallet: go to this path and delete everything on PIRATE folder

Mac ~/Library/Application\ Support/komodo/PIRATE/

Windows %appdata%\komodo\PIRATE\

Linux ~/.komodo/PIRATE

Lite wallet: Click On Edit > Rescan

Carteira Mobile: Click On Left Corner > Rescan > Insert the password and click on Rescan (GUI)

Treasure Chest: Click On File > Rescan

(CLI)  start the daemon with command ./pirated rescan, Or add rescan=1 on pirate.conf file then start the pirate daemon

Delete “Blocks”, “Chainstate” and “Database” Folders from the (PIRATE) folder.

This is located in:

Mac: ~/Library/Application\ Support/komodo/PIRATE/

Windows: %appdata%\komodo\PIRATE\

Linux: ~/.komodo/PIRATE

(GUI) Launch The “Treasure Chest wallet”

(CLI) Starts Pirate chain daemon with `./pirated --bootstrap=2`

Open Command Prompt/Terminal and type:

For (CMD) WINDOWS: rd /s /q "%appdata%\komodo\PIRATE\chainstate" "%appdata%\komodo\PIRATE\blocks" & curl -L -O http://eu.bootstrap.dexstats.info/ARRR-bootstrap.tar.gz & tar -xf ARRR-bootstrap.tar.gz --directory %appdata%\komodo\PIRATE

For (TERMINAL) LINUX :
cd ~/.komodo/PIRATE/;rm -r blocks chainstate;wget -N --no-check-certificate --progress=dot:giga --continue --retry-connrefused --waitretry=3 --timeout=30 http://eu.bootstrap.dexstats.info/ARRR-bootstrap.tar.gz -P /home/$USER/.komodo/PIRATE;tar -xzvf /home/$USER/.komodo/PIRATE/ARRR-bootstrap.tar.gz -C /home/$USER/.komodo/PIRATE

For (TERMINAL)MAC:
cd ~/Library/Application\ Support/Komodo/PIRATE;rm -r blocks chainstate;curl -L -O http://eu.bootstrap.dexstats.info/ARRR-bootstrap.tar.gz;tar -zxf ARRR-bootstrap.tar.gz --directory ~/Library/Application\ Support/Komodo/PIRATE

- Install i2p on your device, Link
- For Windows open `start i2p` it should be on desktop, For Linux type `i2prouter start` on Terminal
- Go to http://127.0.0.1:7657/configclients
- On `Clients` tab start all the controls and mark them as `Run at Startup` and click on `Save Client Configuration`
- Then go to `Pirate` folder, Path:
```
Mac: ~/Library/Application\ Support/komodo/PIRATE/ Windows: %appdata%\komodo\PIRATE\ Linux: ~/.komodo/PIRATE
```
- Open `PIRATE.CONF` file and add theses parameters

```
onlynet=i2p
i2pacceptincoming=1
i2psam=127.0.0.1:7656
printtoconsole=1
addnode=ansfkubmxiq4sf5fhccoyp7m7ixeb7vgbnpy5k6lo4m5hhhvd6oq.b32.i2p:45452
addnode=t4iej4gzetmqv64cbsds5eyxdb4yal75z6jxhmmi4uhfcwgifppa.b32.i2p:45452
addnode=zx2dvd3f7epxfbzfi5r432aznxff2zssp5i7taq7fq3bb3sj4eja.b32.i2p:45452
addnode=cayqxq2k2kqa3ie25dann3lef5xaxo536o4n5hanimzdkzuqziha.b32.i2p:45452
addnode=nwtdqzp5lirzwrg7ightad42iwnvw4unuxglwekx6wibasg2uibq.b32.i2p:45452
addnode=igqltzzkmhbg5k4t4pbhq2f5hnyf3ttmm5qm542ldqw4csq3gkva.b32.i2p:45452
addnode=ac6lzfliaxqnitq4anvrt2nd3diaohznfzgwisf6ogltyfr7gnjq.b32.i2p:45452
addnode=gtyy5vxzlg6eks2ca7jcj5dvq5styrkcfwvajntg7bfihxqyxkea.b32.i2p:45452
addnode=i6lb4rafphxatp3nkhtbo7prznulbqwuvklrin6spu6lttz2nqsa.b32.i2p:45452
```

Save the configurations and start Treasure Chest wallet
- On Treasure chest go `Settings` > `Options` > `Hidden Services` > Select `Connect Through I2P Using SAM Proxy` and `Allow incoming I2p connection`
- Click on OK and restart your wallet
- Once Treasure chest is loaded you should see SAM TCP Client connection on Clients page on Local Tunnels tab at the left bottom